【Purification of color steel plate】 to solve the mystery of clean construction

  Clean the construction of indoor ventilation system after the duct into the air duct handling process should pay attention to the protection of the head, the duct should be carried out before the scene surface cleaning work. Installation of the staff to be blowing, wearing dust-free clothing, masks, shoe covers can be carried out construction.

  Use of the tool material parts to be alcohol scrub, clean paper inspection, meet the requirements before entering the construction site. Time is changing, the industry is changing, so clean engineering companies should also follow the market trends and change, in order to continue in the economic and personalized development direction.

  In the next few years, clean engineering companies in order to occupy a place in the complex market competition, it must be from the traditional value of the competitive model into a competitive model and service competition model, only to better meet customer needs, to provide more customers Quality clean engineering services, in order to ensure the continuous improvement of economic efficiency of enterprises, to achieve sustainable development of enterprises.

  At present, some manufacturers use manual mode to control the air volume and wind pressure regulation, but because of the control of air volume and wind pressure control valve are in the technical compartment, and the ceiling are also color plate of the soft ceiling, are basically in the installation and commissioning When adjusted, then, most did not adjust, in fact, can not be adjusted. The use of air purification plant production workshop, the inlet should be away from the exhaust, the entrance from the ground height of not less than 2 meters, near the source of pollution. UV disinfection, UV disinfection lamp strength shall not be less than 70 microwatts / square centimeter, and in accordance with 30 watts / 10 square meters set, 2,0 meters from the ground lifting.

  We know that activated carbon is a porous carbonaceous material with a highly developed pore structure. The porous structure of activated carbon provides a large amount of surface area for sufficient contact with gas (impurities), giving the activated carbon Of the adsorption properties, it is very easy to absorb the purpose of collecting impurities, which is needed to purify the purification process, like magnetic force, all the molecules have mutual gravity between the physical purification of this point Is the ordinary activated carbon and can not adsorb all the toxic gases, low efficiency, easy to desorption.